Basic Info.
Breaking Capacity
220V/ 380V
Operation
Electric and Manual
Speed
High-Speed Circuit Breaker
Arc-extinguishing Medium
Air
Poles Number
1pole 2pole 3pole 4pole
Type
Smart Circuit Breaker
Function
Conventional Circuit Breaker, Circuit-Breaker Failure Protection, Overcurrent Protection, OVP(Overvoltage Protection)
Communication Way
RS485/ 2g/3G/4G
Installation and Fixing
35mm Rail Installation
Protective Function
Overload/Short Circuit/Auto-Re-Closing/Overvoltage
Wiring
1p+N Single Phase/ 3p +N Three-Phase
Trademark
HonorInsight or OEM
Specification
1P/ 2P/ 3P/ 4P
Product Description
App Control Smart Air Circuit Breaker 1p 2p 3p 4p
WE-H4 series
Attentions
This device must be installed by a qualified electrician, and is not allowed to open device;
Don't operate the device with wet hands, otherwise, an electric shock may occur;
This device is not have waterproofed,do not use it in a humid environment;
The safety lock should be pulled out while installation;
This device will enter "LOCK" mode while the circuit has the fault of overload, short circuit or manually switch off. The unlock process is to manually pull out the safe lock, identify and solve the circuit fault problem. Release safety lock, and manually switch off/on once, it will work.
Product description
The Smart Circuit Breaker WE-H4 series is a highly centralized intelligent electric device that integrates electric energy monitoring, overload, short circuit, over-voltage, under-voltage protection, remote control opening and closing, and network communication functions. It consists of 1gateway and several Schneider circuit breakers, and the circuit breakers do not affect each other and can be controlled and measured separately. Internal functions can be selected according to needs.
Multi-channel control: 1 gateway can carry up to 20 circuit breakers;
Protection function: monitor the power consumption of the output terminal, and automatically cut off the power supply in case of abnormal conditions;
Automatic reclosing: automatic reclosing after the line returns to normal;
Metering function: high-precision real-time monitoring of voltage and current and energy metering, which is conducive to energy consumption analysis on the power consumption side; according to different scenarios, the power threshold setting of different branches can be carried out to realize remote opening and closing.
Wireless communication: With local RS485 communication and 4G wireless communication, it can realize remote opening and closing control, fault inquiry and timing report of measurement data.
Equipment management: It has complete fault status monitoring and real-time reporting and warning prompt.
Electricity fee management: it has metering that meets the national standard, freezing data, etc. Combined with wireless communication, remote management of electricity bills can be realized, and the arrears can be closed.
Humanized display interface: With a large LCD screen display, it can realize remote and local information exchange. The metering parameters and equipment status information are clear at a glance.
Product model
/
Technical parameters
Communication mode | Local RS485 control / network WiFi / 2G / 4G |
Wiring | 1P+N single-phase / 3P +N three-phase |
Rated voltage | Single-phase 230V~/three phase 400V~ |
Frequency | 50/60Hz |
Mechanical life | ≥10000 times |
Action time opening | Opening≤2S, closing≤2S |
Tripping time | ≤0.1S |
Measurement accuracy | Active power level 0.5S,reactive power level 2 |
Over-voltage value | Action value 280V,recovery value 275V;can be set and optional |
Under-voltage value | Action value 115V,recovery value 120V;can be set and optional |
RS485 communication parameters | Default baud rate 9600bps/non parity/8 data bits/ 1 stop bit |
IP level | IP20 |
Use environment temp. | -10ºC~+55ºC |
Storage environment temp. | -25ºC~+70ºC |
Installation and fixing | 35mm rail installation |
Protective function (optional and configurable) | Overload (overload value:default 100A,parameters can be set) |
Short circuit |
Auto-re-closing |
Over-voltage and under-voltage |
Lack of phase |
unbalanced |
Power consumption collection and display | Voltage monitoring |
Current monitoring |
Active power monitoring |
Reactive power monitoring |
Power factor monitoring |
Frequency monitoring |
Equipment temperature monitoring |
Electricity metering | Total active/reactive power |
Net active/reactive power |
Active/reactive power consumption |
Product composition
Main function
The gateway actively reports events
Fault alarm type: send fault only once
Over-current protection, overload protection, over-voltage protection, under (loss) voltage protection, leakage protection, event type, remote close, remote open, local close, local open, leakage protection test, normal mode, remote lock control, local lock control
Communicate with sub-devices (smart circuit breakers)
The communication interface with the sub-equipment is RS485 wired mode
The ID address allocation of sub-devices is from left to right
Every time you add or delete a sub-device, you need to re-allocate the address
Under normal communication, when the sub-device does not respond or responds to the operation of the wrong gateway host, the gateway marks the device as offline
Breaking current | Ics= lcu<6000A |
Way to control | Manual and automatic integrated control |
Leakage protection | Leakage circuit time < 0.1S |
Power limit | Break circuit after 5S of over-limit power |
Self-check for leakage Protection | Self-check can be set |
Over-voltage protection | Except 1P, ≥263V open circuit protection within 10s; ≥250V warning, ≤190V warning |
Rated voltage | 1P/ 2P: 220/230V |
Rated current | 10.16.25.32.40.63 |
communication way | WIFI 2G. 4G |
Tripping characteristics | Type C instantaneous trip current 5-10Ininstantaneous tripping |
Ambient temperature | -40°C- 70°C |
Relative humidity | ≤95% |
Short circuit protection | ≤0.04s power-off time |
Breaking current | Ics= lcu<6000A |
Way to control | Manual and automatic integrated control |
Leakage protection | Leakage circuit time < 0.1S |
Power limit | Break circuit after 5S of over-limit power |
Self-check for leakage protection | Self-test can be set |
Over-voltage protection | Except 1P, >263V open circuit protection within 10s; ≥250V warning, ≤190V warning |
Rated voltage | 3P/4P 380/400V |
Rated current | 16. 20. 25. 32. 40. 63 |
communication method | WIFI 2G. 4G |
Tripping characteristics | Type C instantaneous trip current 5-10Ininstantaneous tripping |
Ambient temperature | -40°C- 70°C |
Relative humidity | ≤95% |
Short circuit protection | ≤0.04s power-off time |
Address:
Room a, 13th Floor, Yifeng Building, S358 Provincial Road, Humen Town, Dongguan, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Agriculture & Food, Electrical & Electronics, Industrial Equipment & Components, Light Industry & Daily Use, Lights & Lighting, Metallurgy, Mineral & Energy, Security & Protection, Service
Management System Certification:
ISO 9001, ISO 14001
Company Introduction:
Honor Insight Iot Technology Co., Ltd. is a high-tech enterprise dedicated to the research and development of the key technologies of the Internet of Things and big data as well as the promotion of industrialization, and to improve the intelligence level of enterprises, institutions and cities. The company chooses "simple and trustworthy, open and win-win" as its purpose, and always helps the government and enterprises to achieve efficient information management and zero emissions.
At present, the company mainly provides smart city lighting management system based on Internet of Things like LoRa, NB-IoT and other communication technologies, photovoltaic power generation off-grid and grid-connected systems, environmental monitoring systems, smart city platforms, private cloud construction and other services.
With ahead hardware and software solutions, supply chain channel integration capabilities, data value development capabilities and complete vertical service genes, we focus on the four major segments of smart PV, smart community, smart site and smart agriculture, together bringing a group of professional background talents from Baidu, Huawei, Tencent, Jinli, Yangzhi, Cisco, etc. In product planning, big data analysis, hardware access, UI design, mobile development, cloud building, system integration, data products and applications.