Basic Info.
Transmission Mode
Full Duplex/ Half Duplex
Transmission Rate
100mbps
Structure of Port
Modular PBX
Information Transmission Method
Digital
Connection Mode
Air Connection
Application
Universal Type
Transport Package
Packing
Specification
130*94*35(mm)
Product Description
Smart cloud box switch for smart cities street light pole with remote control system
Product Description
IntroductionIndustrial-grade smart cloud box 2nd generation optical fiber cloud box series!Our product complies with IEEE802.3U and IEEE802.3z 1000Base-Tx/Fx protocols, and supports full duplex/half duplex mode. Customers can choose the right product according to the following references. Product Parameters
Selection guide:Our product naming rules (IS***F*T-**-XX, ISG1F4T-S20-XX is taken as an example below)IS | G | 1F | 4T | S | 20 | XX | |
IS- | F-100 trillion | 1F- 1 Light mouth | 1T-1 Electrical interface | M-Multimode | 20-20KM | | |
Industry Switch | G-Gigabit | 2F- 2 Light mouth | 2T-2 Electrical interface | S-Single mode | 40-40KM | | |
ISP- | | 3F- 3 Light mouth | 3T-3 Electrical interface | A-Single fiber 1310 | 60-60KM | | |
| | |
Industry POE | | 4F- 4 Light mouth | 4T-4 Electrical interface | B-Single fiber 1550 | 80-80KM | | |
Change machine | | And so on | And so on | SFP | And so on | | |
| | | |
| | | | | | | |
Installation Interface:
RJ-45 interface
It supports CAT5 twisted pair cables up to 100 meters long, and supports automatic switching between parallel and crossover cables (MDI-MDIX). Optical interface:
Support SC/ST/FC/LC optical fiber interface, dual-fiber optical interface has two sockets (TX, RX), single-fiber optical interface has only one socket. When the optical interface is cascaded with the transceiver or switch at the opposite end, the dual-fiber type should be cross-connected, and the single-fiber type can be connected directly. Prompt:
1. This product is suitable for various industrial environments and indoor and outdoor environments;2. When not using the optical port, please plug in the optical port dust cover;3. It is forbidden to observe the TX port directly with eyes to prevent the laser from hurting the eyes;4. Single fiber products must be used in pairs. Troubleshooting
1. The equipment does not match. If the equipment connected to this product (network card, hub, switch) does not match, please select a suitable product according to the rate (10M, 100M, 1000M);2. The optical fiber indicator does not light up, consider the fiber line loss is too large. Fiber wiring, fiber fusion splicing, or improper fiber jumper plugs may cause excessive loss and cause the equipment to work abnormally.
Main features
1. Comply with IEEE 802.3 10 Base-T, IEEE 802.3u 100 Base-TX, IEEE802.3z standards;2. Built-in high-efficiency SRAM data storage space and 1K lookup table, equipped with 4-way hash algorithm;3. Support back pressure flow control, IEEE802.3 X and half duplex;4. Support automatic switching between parallel lines and cross lines;5. Comply with FCC and 15 CLASS A and CE standards Technical parameter
standard | Comply with IEEE802.3 10 Base-T, IEEE 802.3u 100Base-TX, IEEE802.3z and other standards |
| |
Electrical interface | RJ45, supporting Category 5 or Category 6 unshielded twisted pair |
| |
Optical interface | SC/ST/FC/LC |
| |
Mode | Support full duplex and half duplex mode |
| |
Power supply | 110-265V AC;DC10-55V |
| |
Storage temperature | -40ºC-85 ºC |
| |
Operating temperature | -40ºC-85 ºC |
| |
Relative humidity | 5%-95%; |
| |
Applicable | Multimode:50/125, 62.5/125 or 100/140 Micron |
fiber | Single mode:8.3/125, 8.7/125, 9/125 or 10/125 Micron |
| |
Physical dimension | 130 mm x 94 mm x 35 mm |
| |
Connection
The optical fiber interface can be connected to the network to be accessed, and other electrical interfaces can be connected to terminal equipment such as switches or computers. Both optical and electrical ports can be cascaded with any one of them, and the specific usage method can be flexibly configured according to the actual situation on site. When the optical fiber or network cable is connected, the LED indicator of the corresponding port should light up, prompting the user that the device is connected normally. Indicator meaning
1. The LED indicator is used for equipment fault judgment and monitoring, and the specific meaning is as follows:LED indicator | status | meaning |
| | |
POE | bright | PoE power supply connection is normal (PoE switch only) |
| | |
1000 | bright | The current electrical port rate is gigabit |
| | |
| bright | The electrical connection is normal |
LINK | | |
Flashing | Data transmission via electrical port |
|
| | |
| bright | Optical port connection is normal |
FX | | |
Flashing | Optical port has data transmission |
|
| | |
PWR | bright | Power is normal |
| | |
2. The schematic diagram is as follows model | Schematic diagram | Fiber port | Electrical interface | |
SC/ST/LC | RJ45 | |
| | |
One optical port and one electrical port | | 1 | 1 | |
SFP/SC | | | | |
| | | | |
One optical port and two electrical ports | | 1 | 2 | |
SFP/SC | | | | |
| | | | |
One optical port and four electrical ports | | 1 | 4 | |
SFP/SC | | | | |
| | | | |
Two optical ports and four electrical ports | | 2 | 4 | |
SFP/SC | | | | |
| | | | |
Optical transmission characteristics table 1: | specifications | | | Emitted light power | Receiving sensitivity | Allowable loss | |
| (Single fiber series) | | Light wavelength (nm) | |
| | (dBm) | (dBm) | (dbm) | |
| Light wavelength (nm) | | | |
| | | | | | |
| | | | | | | | |
20KM | | 100 trillion | | 1310/1550 | -13~-4 | -33 | 20 | |
| | | | | | |
| Gigabit | | -9~-3 | -24 | 15 | |
| | | |
| | | | | | | | |
40KM | | 100 trillion | | 1310/1550 | -8~--3 | -34 | 26 | |
| | | | | | |
| Gigabit | | -6~-1 | -26 | 20 | |
| | | |
| | | | | | | | |
60KM | | 100 trillion | | 1310/1550 | -5/-10~0/-3 | -36 | 26/30 | |
| | | | | | |
| Gigabit | | -4~1 | -28 | 24 | |
| | | |
| | | | | | | | |
100KM | | 100 trillion | | 1490/1550 | -3~1 | -36 | 33 | |
| | | | | | |
| Gigabit | | -3~1 | -32 | 29 | |
| | | |
| | | | | | | | |
Optical transmission characteristics table 2: | specifications | | Light wavelength | Emitted light power | Receiving sensitivity | Allowable loss | |
| (Double fiber series) | | |
| | (nm) | (dBm) | (dbm) | (dbm) | |
| Light wavelength (nm) | | |
| | | | | | |
| | | | | | | | |
Multimodel | | 100 trillion | | 1310 | -20 ~ -12 | -31 | 11 | |
| | | | | | |
| Gigabit | | -11~-6 | -18 | 7 | |
| | | |
| | | | | | | | |
20KM | | 100 trillion | | 1310 | -15 ~ -7 | -32 | 15 | |
| | | | | | |
| Gigabit | | -7~0 | -21 | 14 | |
| | | |
| | | | | | | | |
40KM | | 100 trillion | | 1310 | -8~-3 | -33 | 25 | |
| | | | | | |
| Gigabit | | -6~0 | -26 | 20 | |
| | | |
| | | | | | | | |
60KM | | 100 trillion | | 1310 | -3~1 | -36 | 33 | |
| | | | | | |
| Gigabit | | -3~1 | -26 | 23 | |
| | | |
| | | | | | | | |
80KM | | 100 trillion | | 1550 | -5~-0 | -36 | 31 | |
| | | | | | |
| Gigabit | | -5~0 | -30 | 25 | |
| | | |
| | | | | | | | |
100KM | | 100 trillion | | 1550 | -6~-1 | -36 | 30 | |
| | | | | | |
| Gigabit | | -3~1 | -32 | 29 | |
| | | |
| | | | | | | | |
Company Profile
Company: System
Address:
Room a, 13th Floor, Yifeng Building, S358 Provincial Road, Humen Town, Dongguan, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics, Industrial Equipment & Components, Light Industry & Daily Use, Lights & Lighting, Metallurgy, Mineral & Energy, Security & Protection, Service
Management System Certification:
ISO 9001, ISO 14001
Company Introduction:
Honor Insight IoT Technology Co., Ltd. is a high-tech enterprise dedicated to the research and development of the key technologies of the Internet of Things and big data as well as the promotion of industrialization, and to improve the intelligence level of enterprises, institutions and cities. The company chooses "simple and trustworthy, open and win-win" as its purpose, and always helps the government and enterprises to achieve efficient information management and zero emissions.
At present, the company mainly provides smart city lighting management system based on Internet of Things like LoRa, NB-IoT and other communication technologies, photovoltaic power generation off-grid and grid-connected systems, environmental monitoring systems, smart city platforms, private cloud construction and other services.
With ahead hardware and software solutions, supply chain channel integration capabilities, data value development capabilities and complete vertical service genes, we focus on the four major segments of smart PV, smart community, smart site and smart agriculture, together bringing a group of professional background talents from Baidu, Huawei, Tencent, Jinli, Yangzhi, Cisco, etc. In product planning, big data analysis, hardware access, UI design, mobile development, cloud building, system integration, data products and applications.